Sfoglia per Rivista WEAR
A novel approach to wear testing in hot stamping of high strength boron steel sheets
2013 Ghiotti, Andrea; Sgarabotto, Francesco; Bruschi, Stefania
Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy
2015 Bordin, Alberto; Bruschi, Stefania; Ghiotti, Andrea; Bariani, PAOLO FRANCESCO
Atomic force acoustic microscopy for quantitative nanomechanical characterization
2011 Marinello, Francesco; Schiavuta, P.; Vezzu', S.; Patelli, Alessandro; Carmignato, Simone; Savio, Enrico
Case study: The application of machining-conditioning to improve the wear resistance of Ti6Al4V surfaces for human hip implants
2018 Bruschi, Stefania; Bertolini, Rachele; Medeossi, Fabrizio; Ghiotti, Andrea; Savio, Enrico; Shivpuri, Rajiv
Characterization and analysis of weld lines on micro-injection moulded parts using atomic force microscopy (AFM)
2009 Tosello, G.; Gava, A.; Hansen, H. N.; Lucchetta, Giovanni; Marinello, Francesco
CMM-based procedure for polyethylene non-congruous unicompartmental knee prosthesis wear assessment
2009 Spinelli, M.; Carmignato, Simone; Affatato, S.; Viceconti, M.
Comparison of tribological and wear performances of AlSi and Zn coatings in hot stamping of boron steel sheets
2015 Ghiotti, Andrea; Bruschi, Stefania; Medea, Francesco
Effects of graphite nano-particle additions on dry sliding behaviour of plasma-electrolytic-oxidation-treated EV31A magnesium alloy against steel in air
2018 Lavinia, Tonelli; Pezzato, Luca; Dolcet, Paolo; Dabala', Manuele; Martini, Carla
Friction of rough surfaces on ice: Experiments and modeling
2016 S., Spagni; Berardo, Alice; D., Marchetto; E., Gualtieri; Pugno, Nicola; S., Valeri
Graphene nanoplatelets as additives to MQL for improving tool life in machining Inconel 718 alloy
2021 Bertolini, R.; Ghiotti, A.; Bruschi, S.
Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys
2017 Sartori, S.; Ghiotti, A.; Bruschi, S.
Influence of matrix hardness on the dry sliding behaviour of 20%vol Al2O3 particulate reinforced 6061 Al metal matrix composite
1997 Tiziani, Alberto; Bonollo, Franco; Straffelini, G.; Molinari, A.
Influence of process parameters on tribological behaviour of AA7075 in hot stamping
2019 Ghiotti, A.; Simonetto, E.; Bruschi, S.
A new machine for testing ferrofluids lubrication performances by reciprocating sliding wear
2023 Simonetto, E.; Ghiotti, A.; Brun, M.; Bruschi, S.
Plastic flattening of a sinusoidal metal surface: A discrete dislocation plasticity study
2012 Sun, Fengwei; Van der Giessen, Erik; Nicola, Lucia
The use of Raman spectroscopy in the analysis of UHMWPE uni-condylar bearing systems after run on a force and displacement control knee simulators
2013 Affatato, S.; Modena, E.; Carmignato, Simone; Taddei, P.
Tool wear analysis in high-frequency vibration-assisted drilling of additive manufactured Ti6Al4V alloy
2021 Sorgato, M.; Bertolini, R.; Ghiotti, A.; Bruschi, S.
Tool wear assessment when drilling AISI H13 tool steel multilayered claddings
2023 Sorgato, M.; Bertolini, R.; Ghiotti, A.; Bruschi, S.
Tool wear reduction in ultrasonic vibration-assisted turning of SiC-reinforced metal-matrix composite
2023 Bertolini, R.; Ghiotti, Andrea; Tamil Alagan, N.; Bruschi, S.
Tribological behaviour of DLC coatings for sheet metal forming tools
2011 Ghiotti, Andrea; Bruschi, Stefania
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile