Sfoglia per Autore
A unified treatment of the fatigue limit of components weakened by U- and V-notches, subjected to multiaxial mode I, II, and III loading
2024 Collini, F.; Rigon, D.; Meneghetti, G.
Fracture mechanics-based analysis of the fatigue limit of Ti6Al4V alloy specimens manufactured by SLM in as-built surface conditions by means of areal measurements
2024 Rigon, D.; Coppola, F.; Meneghetti, G.
An analysis of the dependence of the material length parameter a0 on the stress ratio
2023 Atzori, B; Rigon, D; Meneghetti, G
Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation
2022 Rigon, Daniele; Berto, Filippo; Meneghetti, Giovanni
Estimating the fatigue thresholds of additively manufactured metallic materials with consideration of defects
2022 Rigon, D.; Meneghetti, G.
Engineering estimation of the fatigue limit of wrought and defective additively manufactured metals for different load ratios
2022 Rigon, D.; Meneghetti, G.
An engineering approach to estimate fatigue thresholds of wrought and additively manufactured defective metallic materials
2021 Rigon, Daniele; Meneghetti, Giovanni
Fatigue behaviour of 3D printed virgin and recycled short-glass-fiber-reinforced and mineral-filled polypropylene
2021 Rigon, D.; Florian, F.; Ricotta, M.; Ardengo, G.; Trivillin, F.; Meneghetti, G.
Static mechanical properties of virgin and recycled short glass fiber-reinforced polypropylene produced by pellet additive manufacturing
2021 Rigon, Daniele; Ricotta, Mauro; Ardengo, Giovanni; Meneghetti, Giovanni
Estimating the multiaxial fatigue behaviour of C45 steel specimens by using the energy dissipation
2021 Rigon, D.; Berto, F.; Meneghetti, G.
An engineering estimation of fatigue thresholds from a microstructural size and Vickers hardness: application to wrought and additively manufactured metals
2020 Rigon, Daniele; Meneghetti, Giovanni
A literature survey on structural integrity of 3D printed virgin and recycled ABS and PP compounds
2020 Rigon, D.; Ricotta, M.; Meneghetti, G.
Fatigue Strength Evaluation of Notched Ductile Steel Specimens Using Critical Distances
2020 Atzori, Bruno; Ricotta, Mauro; Campagnolo, Alberto; Rigon, Daniele; Meneghetti, Giovanni
Development and assessment of energy methods for structural durability
2019 Rigon, Daniele
ANALISI DELLA DISSIPAZIONE DI ENERGIA SU PROVINI TUBOLARI IN PARETE SOTTILE IN ACCIAIO C45 BONIFICATO SOGGETTI A CARICHI MULTIASSIALI
2019 Rigon, D.; Berto, F.; Meneghetti, G.
INFLUENCE OF DEFECTS AND SHARP NOTCHES ON AXIAL FATIGUE STRENGTH OF ADDITIVELY MANUFACTURED MARAGING STEEL SPECIMENS
2019 Meneghetti, G.; Rigon, D.; Dabalà, M.; Gennari, C.
An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing
2019 Meneghetti, G.; Rigon, D.; Gennari, C.
Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens
2019 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
ANALISI DELLA DISSIPAZIONE DI ENERGIA IN PROSSIMITÀ DELL’APICE DI INTAGLI IN PROVINI IN ACCIAIO INOSSIDABILE AISI 304L
2018 Rigon, Daniele
STIMA DELLA RESISTENZA A FATICA IN PRESENZA DI INTAGLI ACUTI PER ACCIAI AD ELEVATA DUTTILITÀ
2018 Atzori, B.; Campagnolo, A.; Rigon, D.; Ricotta, M.; Meneghetti, G.
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile