The necessity of better plasma current control during the startup phase asks for a toroidal loop voltage modulation obtained with the multi step reduction of the transfer energy resistor in the OH circuit. The paper begins by discussing the characteristics of such a modulation and then describes the modifications realized and tested on the power supply and magnet systems to prove the feasibility of such an operation; finally, on the basis of the results obtained, we describe the design of the making switch system, based on a 100 mm thyristor valve
Titolo: | Thyristor Making Switch System for Plasma Startup Control in RFX |
Autori: | |
Data di pubblicazione: | 1999 |
Abstract: | The necessity of better plasma current control during the startup phase asks for a toroidal loop voltage modulation obtained with the multi step reduction of the transfer energy resistor in the OH circuit. The paper begins by discussing the characteristics of such a modulation and then describes the modifications realized and tested on the power supply and magnet systems to prove the feasibility of such an operation; finally, on the basis of the results obtained, we describe the design of the making switch system, based on a 100 mm thyristor valve |
Handle: | http://hdl.handle.net/11577/177973 |
Appare nelle tipologie: | 04.01 - Contributo in atti di convegno |
File in questo prodotto:
Non ci sono file associati a questo prodotto.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.