This study moves from the need to study flow boiling of zeotropic mixture in microchannels. In the recent years much attention has been paid to the possible use of fluorinated propene isomers for the substitution of high-GWP refrigerants. The available HFOs (hydrofluoroolefins) cannot cover all the airconditioning, heat pump, and refrigeration systems when used as pure fluids because their thermodynamic properties are not suitable for all operating conditions and therefore some solutions may be found using blends of refrigerants, to satisfy the demand for a wide range of working conditions. In the present paper a mixture of R1234ze(E) and R32 (0.5/0.5 by mass) has been studied. The local heat transfer coefficient during flow boiling of this mixture in a single microchannel with 0.96 mm diameter is measured at a pressure of 14 bar, which corresponds to a bubble temperature of 26.3°C. The flow boiling data taken in the present test section are discussed, with particular regard to the effect of heat flux, mass velocity and vapor quality. The heat transfer coefficients are compared against some predicting models available in the literature. Furthermore, the new experimental data are compared to flow boiling data of pure R1234ze(E) and pure R32 to analyze the heat transfer penalization due to the mass transfer resistance of this zeotropic mixture.

Flow boiling heat transfer of a non-azeotropic mixture inside a single microchannel

DEL COL, DAVIDE;AZZOLIN, MARCO;BORTOLIN, STEFANO
2014

Abstract

This study moves from the need to study flow boiling of zeotropic mixture in microchannels. In the recent years much attention has been paid to the possible use of fluorinated propene isomers for the substitution of high-GWP refrigerants. The available HFOs (hydrofluoroolefins) cannot cover all the airconditioning, heat pump, and refrigeration systems when used as pure fluids because their thermodynamic properties are not suitable for all operating conditions and therefore some solutions may be found using blends of refrigerants, to satisfy the demand for a wide range of working conditions. In the present paper a mixture of R1234ze(E) and R32 (0.5/0.5 by mass) has been studied. The local heat transfer coefficient during flow boiling of this mixture in a single microchannel with 0.96 mm diameter is measured at a pressure of 14 bar, which corresponds to a bubble temperature of 26.3°C. The flow boiling data taken in the present test section are discussed, with particular regard to the effect of heat flux, mass velocity and vapor quality. The heat transfer coefficients are compared against some predicting models available in the literature. Furthermore, the new experimental data are compared to flow boiling data of pure R1234ze(E) and pure R32 to analyze the heat transfer penalization due to the mass transfer resistance of this zeotropic mixture.
2014
4th Micro and Nano Flows Conference
9781908549167
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/2925099
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact