Ti6Al4V-based metal matrix composites (MMCs) are successfully synthesized via a novel process route. Ti6Al4V powder is premixed with a solid preceramic polymer used as precursor for the in situ formation of a ceramic phase dispersed at the micrometer range. Ball-milling is used to intimately mix the powders. After the pyrolysis and sintering step, a Ti5Si3 and TiC dispersion within the Ti6Al4V equiaxed grains matrix is formed. The effect of the volume fraction of the polymer-derived ceramic phase in the Ti6Al4V matrix is investigated in terms of Vickers hardness and wear resistance. The introduction of 10 vol% of ceramic reinforcement produces a homogeneous structure and results in a compact material with improved integrity and enhanced mechanical properties compared to standard cast alloy or Ti6Al4V-based composites reported in the literature.
In situ reinforcement of Ti6Al4V matrix composites by polymer-derived-ceramics phases
FABRIZI, ALBERTO;BONOLLO, FRANCO;COLOMBO, PAOLO;BIASETTO, LISA
2015
Abstract
Ti6Al4V-based metal matrix composites (MMCs) are successfully synthesized via a novel process route. Ti6Al4V powder is premixed with a solid preceramic polymer used as precursor for the in situ formation of a ceramic phase dispersed at the micrometer range. Ball-milling is used to intimately mix the powders. After the pyrolysis and sintering step, a Ti5Si3 and TiC dispersion within the Ti6Al4V equiaxed grains matrix is formed. The effect of the volume fraction of the polymer-derived ceramic phase in the Ti6Al4V matrix is investigated in terms of Vickers hardness and wear resistance. The introduction of 10 vol% of ceramic reinforcement produces a homogeneous structure and results in a compact material with improved integrity and enhanced mechanical properties compared to standard cast alloy or Ti6Al4V-based composites reported in the literature.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
