Shearing along faults and stratigraphic joints controlled by land subsidence in the Valley of Queretaro, Mexico

Slip of nearly vertical faults or horizontal stratigraphic joints has provoked the shearing of at least 16 well casings in a period of over 10 years in the Valley of Queretaro aquifer, Mexico. Evidence integrated from field observations, remote surface-deformation monitoring, in-situ monitoring, stratigraphic correlation, and numerical modeling indicate that groundwater depletion and land subsidence induce shearing. Two main factors conditioning the stress distribution and the location of sheared well casings have been identified: (1) slip on fault planes, and (2) slip on stratigraphic joints. Additionally, the distribution of piezometric gradients may be a factor that enhances shearing. Slip on faults can be generated either by the compaction of sedimentary units (passive faulting) or by slip of blocks delimited by pre-existing faults (reactivation). Major piezometric-level declines and the distribution of hydraulic gradients can also be associated with slip at stratigraphic joints. Faults and hydraulic contrasts in the heterogeneous rock sequence, along with groundwater extraction, influence the distribution of the gradients and delimit the compartments of groundwater in the aquifer. Analogue modeling allowed assessment of the distribution of stress–strain and displacements associated with the increase of the vertical stress. Fault-bounded aquifers in grabens are common in the central part of Mexico and the results obtained can be applied to other subsiding, structurally controlled aquifer systems elsewhere.