The geopolymers (inorganic polymers formed basically of silicates) have attracted increasing attention from academia for several reasons, particularly because it is considered a sustainable material where industrial by-products (fly ash and blast furnace slag) can be used as raw material, and is based on a low energy cost process. Such materials find applications in virtually all industrial sectors, depending on the molar ratio Si:Al, responsible for its properties. Currently the application of large volumes of geopolymers is focused on replacement of Portland cement, a material with an extremely aggressive process of obtaining to the environment. However, due to their similar properties to the ceramic material and increase search for new applications, studies of porous geopolymers are also of great interest. Processing routes currently used to obtain porous geopolymers are based on the civil construction for the production of aerated concrete with closed porosity, limiting their application. Thus, the development of a new processing route to produce porous geopolymers, which permits the formation of a structure with open porosity, enabling the expansion in the applications of such material is essential. Two different routes are proposed based on porous ceramic processing routes with highly porous geopolymers results, with a homogeneous microstructure, and open cell porosity of up to about 85vol%, with physical properties that suggest they may be used as a substitute for low-cost highly porous ceramics for applications such as catalyst supports, filtration of hot gases, adsorption and insulating refractory furnaces.

I geopolimeri (polimeri inorganici formate principalmente da silicati) hanno attirato sempre più attenzione da parte del mondo accademico per diversi motivi, soprattutto perché è considerato un materiale sostenibile dove industriale (ceneri volanti e scorie di altoforno) può essere utilizzato come materia prima, e si basa su un processo a basso costo energetico. Tali materiali trovano applicazione in tutti i settori industriali, in funzione del rapporto molare Si:Al, responsabile delle sue proprietà. Attualmente l'applicazione di grandi volumi di geopolimeri è focalizzata sulla sostituzione del cemento Portland, un materiale con un processo estremamente aggressiva ottenere dell'ambiente. Tuttavia, a causa delle loro proprietà simili al materiale ceramico e aumentando la ricerca di nuove applicazioni, studi di geopolimeri porosi è anche di grande interesse. Percorsi di lavorazione attualmente utilizzate per ottenere geopolimeri porosi sono basate sulla produzione di calcestruzzo aerato con porosità chiusa, limitando la loro applicazione. Pertanto, lo sviluppo di una nuova via di elaborazione per geopolimeri porosi, che consente lo sviluppo di una struttura con porosità aperta, consentendo l'espansione nelle applicazioni di tale materiale è essenziale. Due percorsi differenti sono proposti basato su percorsi utilizzato con ceramici porosi, con risultati di geopolimeri altamente porosi, con una microstruttura omogenea, cellula aperta e porosità fino a circa 85vol%, con proprietà fisiche che suggeriscono che possono essere utilizzati come un sostituto basso costo per ceramica altamente porosi in applicazioni come supporti di catalizzatore, filtrazione di gas caldi, adsorbimento e isolamento refrattario per forni.

Highly porous geopolymers: effect of the processing route on the reached properties(2015 Feb 05).

Highly porous geopolymers: effect of the processing route on the reached properties

-
2015

Abstract

I geopolimeri (polimeri inorganici formate principalmente da silicati) hanno attirato sempre più attenzione da parte del mondo accademico per diversi motivi, soprattutto perché è considerato un materiale sostenibile dove industriale (ceneri volanti e scorie di altoforno) può essere utilizzato come materia prima, e si basa su un processo a basso costo energetico. Tali materiali trovano applicazione in tutti i settori industriali, in funzione del rapporto molare Si:Al, responsabile delle sue proprietà. Attualmente l'applicazione di grandi volumi di geopolimeri è focalizzata sulla sostituzione del cemento Portland, un materiale con un processo estremamente aggressiva ottenere dell'ambiente. Tuttavia, a causa delle loro proprietà simili al materiale ceramico e aumentando la ricerca di nuove applicazioni, studi di geopolimeri porosi è anche di grande interesse. Percorsi di lavorazione attualmente utilizzate per ottenere geopolimeri porosi sono basate sulla produzione di calcestruzzo aerato con porosità chiusa, limitando la loro applicazione. Pertanto, lo sviluppo di una nuova via di elaborazione per geopolimeri porosi, che consente lo sviluppo di una struttura con porosità aperta, consentendo l'espansione nelle applicazioni di tale materiale è essenziale. Due percorsi differenti sono proposti basato su percorsi utilizzato con ceramici porosi, con risultati di geopolimeri altamente porosi, con una microstruttura omogenea, cellula aperta e porosità fino a circa 85vol%, con proprietà fisiche che suggeriscono che possono essere utilizzati come un sostituto basso costo per ceramica altamente porosi in applicazioni come supporti di catalizzatore, filtrazione di gas caldi, adsorbimento e isolamento refrattario per forni.
5-feb-2015
The geopolymers (inorganic polymers formed basically of silicates) have attracted increasing attention from academia for several reasons, particularly because it is considered a sustainable material where industrial by-products (fly ash and blast furnace slag) can be used as raw material, and is based on a low energy cost process. Such materials find applications in virtually all industrial sectors, depending on the molar ratio Si:Al, responsible for its properties. Currently the application of large volumes of geopolymers is focused on replacement of Portland cement, a material with an extremely aggressive process of obtaining to the environment. However, due to their similar properties to the ceramic material and increase search for new applications, studies of porous geopolymers are also of great interest. Processing routes currently used to obtain porous geopolymers are based on the civil construction for the production of aerated concrete with closed porosity, limiting their application. Thus, the development of a new processing route to produce porous geopolymers, which permits the formation of a structure with open porosity, enabling the expansion in the applications of such material is essential. Two different routes are proposed based on porous ceramic processing routes with highly porous geopolymers results, with a homogeneous microstructure, and open cell porosity of up to about 85vol%, with physical properties that suggest they may be used as a substitute for low-cost highly porous ceramics for applications such as catalyst supports, filtration of hot gases, adsorption and insulating refractory furnaces.
porous geopolymers; processing route; properties
Highly porous geopolymers: effect of the processing route on the reached properties(2015 Feb 05).
File in questo prodotto:
File Dimensione Formato  
marcelo_strozi_cilla_thesis.pdf

accesso aperto

Tipologia: Tesi di dottorato
Licenza: Non specificato
Dimensione 4.47 MB
Formato Adobe PDF
4.47 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/3424164
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact