RIGON, DANIELE
RIGON, DANIELE
Dipartimento di Ingegneria Industriale - DII
A literature survey on structural integrity of 3D printed virgin and recycled ABS and PP compounds
2020 Rigon, D.; Ricotta, M.; Meneghetti, G.
An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing
2019 Meneghetti, G.; Rigon, D.; Gennari, C.
An analysis of the dependence of the material length parameter a0 on the stress ratio
2023 Atzori, B; Rigon, D; Meneghetti, G
An analysis of the specific heat loss at the tip of severely notched stainless steel specimens to correlate the fatigue strength
2017 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
An engineering approach to estimate fatigue thresholds of wrought and additively manufactured defective metallic materials
2021 Rigon, Daniele; Meneghetti, Giovanni
An engineering estimation of fatigue thresholds from a microstructural size and Vickers hardness: application to wrought and additively manufactured metals
2020 Rigon, Daniele; Meneghetti, Giovanni
Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens
2019 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
Analysis of the energy dissipation in multiaxial fatigue tests of AISI 304L stainless steel bars
2018 Rigon, D.; Formilan, V.; Meneghetti, G.
Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation
2022 Rigon, Daniele; Berto, Filippo; Meneghetti, Giovanni
Engineering estimation of the fatigue limit of wrought and defective additively manufactured metals for different load ratios
2022 Rigon, D.; Meneghetti, G.
Estimating the fatigue thresholds of additively manufactured metallic materials with consideration of defects
2022 Rigon, D.; Meneghetti, G.
Estimating the multiaxial fatigue behaviour of C45 steel specimens by using the energy dissipation
2021 Rigon, D.; Berto, F.; Meneghetti, G.
Evaluating the specific heat loss in severely notched stainless steel specimens for fatigue strength analyses
2018 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
Fatigue behaviour of 3D printed virgin and recycled short-glass-fiber-reinforced and mineral-filled polypropylene
2021 Rigon, D.; Florian, F.; Ricotta, M.; Ardengo, G.; Trivillin, F.; Meneghetti, G.
Fatigue Strength Evaluation of Notched Ductile Steel Specimens Using Critical Distances
2020 Atzori, Bruno; Ricotta, Mauro; Campagnolo, Alberto; Rigon, Daniele; Meneghetti, Giovanni
Fracture mechanics-based analysis of the fatigue limit of Ti6Al4V alloy specimens manufactured by SLM in as-built surface conditions by means of areal measurements
2024 Rigon, D.; Coppola, F.; Meneghetti, G.
Influence of build orientation on static and axial fatigue properties of Maraging steel specimens produced by additive manufacturing
2017 Meneghetti, Giovanni; Rigon, Daniele; Cozzi, D.; Waldhauser, W.; Dabala', Manuele
Multiaxial fatigue strength assessment of welded joints using the Peak Stress Method – Part II: Application to structural steel joints
2017 Meneghetti, Giovanni; Campagnolo, Alberto; Rigon, Daniele
Multiaxial fatigue strength assessment of welded joints using the peak stress method - part I: approach and application to aluminium joints
2017 Meneghetti, Giovanni; Campagnolo, Alberto; Rigon, Daniele
Static mechanical properties of virgin and recycled short glass fiber-reinforced polypropylene produced by pellet additive manufacturing
2021 Rigon, Daniele; Ricotta, Mauro; Ardengo, Giovanni; Meneghetti, Giovanni