A general algorithm based on the Hopscotch method and a conformal map is used to treat electrochemical reactions with coupled homogeneous chemical reactions occurring both at conventionally sized electrodes and at ultramicroelectrodes. A change of the dimensionless parameter p = a(nFv/RTD)1/2, where a is the radius of the electrode, v the potential sweep rate and D the diffusion coefficient, allows us to describe properly the planar and the convergent mass transfer to an inlaid disk-shaped electrode. The dimensionless parameter lambda'= ka2/D, which is a function of the sum of the chemical rate constants (k) and of the electrode radius, describes the kinetics and may be used instead of the conventional parameter lambda = k(RT/nFv). A suitable choice of the space-time grid gives accurate results, even for kinetic problems affected by stiffness difficulties. The adequacy of the implementation is established by comparison with known solutions relative to the EC(irr') EC' and CE mechanisms for two limiting cases, i.e. planar and radial mass transport conditions.

Digital Simulation of Steady-State and non-Steady State Voltammetric Responses for Electrochemical Reactions Occurring at an Inlaid Microdisk Electrode. Application to EC(irr), EC', CE First Order Reactions

PASTORE, PAOLO;
1993

Abstract

A general algorithm based on the Hopscotch method and a conformal map is used to treat electrochemical reactions with coupled homogeneous chemical reactions occurring both at conventionally sized electrodes and at ultramicroelectrodes. A change of the dimensionless parameter p = a(nFv/RTD)1/2, where a is the radius of the electrode, v the potential sweep rate and D the diffusion coefficient, allows us to describe properly the planar and the convergent mass transfer to an inlaid disk-shaped electrode. The dimensionless parameter lambda'= ka2/D, which is a function of the sum of the chemical rate constants (k) and of the electrode radius, describes the kinetics and may be used instead of the conventional parameter lambda = k(RT/nFv). A suitable choice of the space-time grid gives accurate results, even for kinetic problems affected by stiffness difficulties. The adequacy of the implementation is established by comparison with known solutions relative to the EC(irr') EC' and CE mechanisms for two limiting cases, i.e. planar and radial mass transport conditions.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/124161
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 42
  • ???jsp.display-item.citation.isi??? 41
social impact