Condensation in minichannels is widely used in air-cooled condensers for the automotive and air-conditioning industry, in heat pipes and other applications for system thermal control. The knowledge of pressure drops in such small channels is important in order to optimize heat transfer surfaces. This paper presents a model for calculation of the frictional pressure gradient during condensation or adiabatic liquid–gas flow inside minichannels with different surface roughness. In order to account for the effects of surface roughness, new experimental frictional pressure gradient data associated to single-phase flow and adiabatic two-phase flow of R134a inside a single horizontal mini tube with rough wall has been used in the modelling. It is a Friedel (1979) [Friedel, L., 1979. Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow. In: Proceedings of the European Two-Phase Flow Group Meeting, Ispra, Paper E2] based model and it takes into account mass velocity, vapor quality, fluid properties, reduced pressure, tube diameter, entrainment ratio and surface roughness. With respect to the flow pattern prediction capability, it has been built for shear dominated flow regimes inside pipes, thus, annular, annular-mist and mist flow are here predicted. However, the suggested procedure is extended to the intermittent flow in minichannels and it is also applied with success to horizontal macro tubes.

Frictional pressure drop during vapour-liquid flow in minichannels: Modelling and experimental evaluation

CAVALLINI, ALBERTO;DEL COL, DAVIDE;MATKOVIC, MARKO;ROSSETTO, LUISA
2009

Abstract

Condensation in minichannels is widely used in air-cooled condensers for the automotive and air-conditioning industry, in heat pipes and other applications for system thermal control. The knowledge of pressure drops in such small channels is important in order to optimize heat transfer surfaces. This paper presents a model for calculation of the frictional pressure gradient during condensation or adiabatic liquid–gas flow inside minichannels with different surface roughness. In order to account for the effects of surface roughness, new experimental frictional pressure gradient data associated to single-phase flow and adiabatic two-phase flow of R134a inside a single horizontal mini tube with rough wall has been used in the modelling. It is a Friedel (1979) [Friedel, L., 1979. Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow. In: Proceedings of the European Two-Phase Flow Group Meeting, Ispra, Paper E2] based model and it takes into account mass velocity, vapor quality, fluid properties, reduced pressure, tube diameter, entrainment ratio and surface roughness. With respect to the flow pattern prediction capability, it has been built for shear dominated flow regimes inside pipes, thus, annular, annular-mist and mist flow are here predicted. However, the suggested procedure is extended to the intermittent flow in minichannels and it is also applied with success to horizontal macro tubes.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/2438348
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 108
  • ???jsp.display-item.citation.isi??? 104
social impact