A bare filament quasi-circular flywheel has been instrumented with strain gauges and the strains in the spokes measured using a slip-ring assembly to transfer the signal from the strain gauges to the stator of the machine. The results are compared with theoretical results obtained using a mathematical model described in previous papers. The results of some temperature measurements, aimed at defining possible test procedures rather than evaluating the temperature field of the flywheel, are also presented. The influence of the results obtained on the design of such highly loaded structures is discussed. © 1985.
Experimental study of the stress distribution in the spokes of bare filament flywheels
RONCO C
1985
Abstract
A bare filament quasi-circular flywheel has been instrumented with strain gauges and the strains in the spokes measured using a slip-ring assembly to transfer the signal from the strain gauges to the stator of the machine. The results are compared with theoretical results obtained using a mathematical model described in previous papers. The results of some temperature measurements, aimed at defining possible test procedures rather than evaluating the temperature field of the flywheel, are also presented. The influence of the results obtained on the design of such highly loaded structures is discussed. © 1985.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
