Wrist injuries are one of the most common fractures, specifically around 25% of fractures among the pediatric population and up to 18% in the elderly age group are distal radius fractures. To date, the standard treatment entails the use of a tailor-made plaster Paris cast. Although it is a simple and reliable treatment, it presents several disadvantages: its weight generally causes discomfort, it cannot be taken off without breaking it, it can cause skin rashes and prevents ventilation of the treated area. To overcome the limitations of the above mentioned treatment, 3D printed orthopaedic casts based on reverse engineering (RE) and additive manufacturing (AM) techniques have been proposed in literature. Despite these solutions prove to be a valid alternative to the standard treatment, the clinical use of AM-based devices is not trivial due to the need of expert CAD modelers to design the 3D model of the orthosis starting from the patient’s anatomy 3D acquisition. In this work, the authors identify a systematic procedure to create an orthosis model, compliant with medical guidelines, using common CAD tools: the CAD-modeling steps are grouped into five main blocks in view of a future automatization of the process, which can eliminate the necessity of designing expertise to model the orthosis. The produced device is composed of two halves, to ease the application, locked through a zip tie-based mechanism. A preliminary ventilation pattern is proposed and tested with a FEM analysis to ensure structural resistance. The procedure has been tested on six case studies: all the orthoses models were correctly generated without major complications and positive user feedbacks were generally obtained throughout the tests.

A CAD-based Procedure for Designing 3D Printable Arm-wrist-hand Cast

Francesca Uccheddu;
2018

Abstract

Wrist injuries are one of the most common fractures, specifically around 25% of fractures among the pediatric population and up to 18% in the elderly age group are distal radius fractures. To date, the standard treatment entails the use of a tailor-made plaster Paris cast. Although it is a simple and reliable treatment, it presents several disadvantages: its weight generally causes discomfort, it cannot be taken off without breaking it, it can cause skin rashes and prevents ventilation of the treated area. To overcome the limitations of the above mentioned treatment, 3D printed orthopaedic casts based on reverse engineering (RE) and additive manufacturing (AM) techniques have been proposed in literature. Despite these solutions prove to be a valid alternative to the standard treatment, the clinical use of AM-based devices is not trivial due to the need of expert CAD modelers to design the 3D model of the orthosis starting from the patient’s anatomy 3D acquisition. In this work, the authors identify a systematic procedure to create an orthosis model, compliant with medical guidelines, using common CAD tools: the CAD-modeling steps are grouped into five main blocks in view of a future automatization of the process, which can eliminate the necessity of designing expertise to model the orthosis. The produced device is composed of two halves, to ease the application, locked through a zip tie-based mechanism. A preliminary ventilation pattern is proposed and tested with a FEM analysis to ensure structural resistance. The procedure has been tested on six case studies: all the orthoses models were correctly generated without major complications and positive user feedbacks were generally obtained throughout the tests.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/3379857
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 24
  • ???jsp.display-item.citation.isi??? ND
  • OpenAlex ND
social impact