A Novel Integrated CAD-Multibody Approach for TMJ Prosthesis Design

This study presents a methodology for optimizing the design of the fossa component in temporomandibular joint (TMJ) prostheses, particularly in cases requiring replacement due to severe pathology or trauma. Leveraging advancements in 3D printing, the research aims to align prosthetic function with natural jaw movements. A multibody simulation model was used to evaluate different designs based on key performance indicators: range of motion, condylar trajectory accuracy, and contact force magnitudes. Three designs were analyzed: a compact design fossa (CDF) with a spherical condyle, an enhanced design fossa (EDF) with a more anatomically realistic structure, and a simulation-driven design (MEDF) derived from condylar motion patterns. The results indicate that CDF could lead to dislocation at 13° of mouth opening. In contrast, EDF and MEDF safely enabled full opening (20°), closely replicated natural condyle trajectories (with deviations under 2.5 mm in all directions), and reduced contact forces, which can contribute to a longer prosthesis lifespan. MEDF showed the lowest peak contact force (−21% compared to EDF). The study successfully established a framework for evaluating and guiding patient-specific TMJ prosthetic designs, enhancing both functional rehabilitation and mechanical durability by minimizing wear through optimized contact dynamics.