The first large Fabry-Perot etalon (Ø35 cm) of the VTF instrument was coated successfully using IBS technique. The High Reflective (HR) coatings need to meet the reflectivity specifications (95 +/- 1%) over the entire wavelength range 520-870 nm and the entire aperture (Ø25 cm) and also preserve the plate's flatness and airgap uniformity between the two platesto be better than 3 nm RMS. The change of the figure error of the individual faces after HR coating was exceptionally small: For plate 1 (upper) it changed from 1.7nm RMS before coating to 2.12 nm after coating, no change at all for plate 2 (lower).
High uniformity IBS coatings for the world's largest Fabry-Perot etalon of the VTF instrument
Cagnoli G.;
2018
Abstract
The first large Fabry-Perot etalon (Ø35 cm) of the VTF instrument was coated successfully using IBS technique. The High Reflective (HR) coatings need to meet the reflectivity specifications (95 +/- 1%) over the entire wavelength range 520-870 nm and the entire aperture (Ø25 cm) and also preserve the plate's flatness and airgap uniformity between the two platesto be better than 3 nm RMS. The change of the figure error of the individual faces after HR coating was exceptionally small: For plate 1 (upper) it changed from 1.7nm RMS before coating to 2.12 nm after coating, no change at all for plate 2 (lower).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
