This study examines L-PBF-fabricated aluminium alloy specimens with smooth and notched geometries, assessing their axial fatigue performance in both as-built and heat-treated conditions. The influence of the performed heat treatment on microstructure, production defects and fatigue properties was investigated on unnotched specimens and specimens with deep U-notch geometry. The experimental results revealed significant impact of heat treatment on the microstructure and internal defects, which resulted in an enhancement of fatigue properties of the specimens. Lastly, the fatigue results revealed a negligible impact of the employed heat treatment on the notch sensitivity of the studied materials.
Fatigue analysis of as-built and heat-treated severely notched AlSi10Mg alloy specimens made by laser powder bed fusion technology
Spiller S.;
2024
Abstract
This study examines L-PBF-fabricated aluminium alloy specimens with smooth and notched geometries, assessing their axial fatigue performance in both as-built and heat-treated conditions. The influence of the performed heat treatment on microstructure, production defects and fatigue properties was investigated on unnotched specimens and specimens with deep U-notch geometry. The experimental results revealed significant impact of heat treatment on the microstructure and internal defects, which resulted in an enhancement of fatigue properties of the specimens. Lastly, the fatigue results revealed a negligible impact of the employed heat treatment on the notch sensitivity of the studied materials.
| File | Dimensione | Formato | |
|---|---|---|---|
|
1-s2.0-S014211232300542X-main.pdf
accesso aperto
Tipologia:
Published (Publisher's Version of Record)
Licenza:
Creative commons
Dimensione
45.23 MB
Formato
Adobe PDF
|
45.23 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
