RICOTTA, MAURO
RICOTTA, MAURO
Dipartimento di Ingegneria Industriale - DII
A heat energy dissipation approach to elastic-plastic fatigue crack propagation
2020 Meneghetti, G.; Ricotta, M.
A literature survey on structural integrity of 3D printed virgin and recycled ABS and PP compounds
2020 Rigon, D.; Ricotta, M.; Meneghetti, G.
A penetration efficiency model for the optimization of solid conical microneedles’ geometry
2024 Piccolo, Leonardo; Bornillo, Kristal; Micheli, Sara; Sorgato, Marco; Ricotta, Mauro; Cimetta, Elisa; Lucchetta, Giovanni
A synthesis of the low- and medium-cycle fatigue behaviour of as cast and austempered ductile irons based on the plastic strain energy
2014 Meneghetti, Giovanni; Ricotta, Mauro; Atzori, Bruno
A synthesis of the push-pull fatigue behaviour of plain and notched stainless steel specimens by using the specific heat loss
2013 Meneghetti, Giovanni; Ricotta, Mauro; Atzori, Bruno
A two-parameter, heat energy-based approach to analyse the mean stress influence on axial fatigue behaviour of plain steel specimens
2016 Meneghetti, Giovanni; Ricotta, Mauro; Atzori, Bruno
An analysis of the specific heat loss at the tip of severely notched stainless steel specimens to correlate the fatigue strength
2017 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
An hysteresis energy-based synthesis of fully reversed axial fatigue behaviour of different polypropylene composites
2014 Meneghetti, Giovanni; Ricotta, Mauro; Lucchetta, Giovanni; Carmignato, Simone
Analysis and comparison of some LEFM parameters
2019 Atzori, B.; Campagnolo, A.; Ricotta, M.; Meneghetti, G.
Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens
2019 Rigon, Daniele; Ricotta, Mauro; Meneghetti, Giovanni
Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation
2011 Atzori, Bruno; Meneghetti, Giovanni; Ricotta, Mauro
Comparison of Experimental Thermal Methods for the Fatigue Limit Evaluation of a Stainless Steel
2019 Ricotta, Mauro; Meneghetti, Giovanni; Atzori, Bruno; Risitano, Giacomo; Risitano, Antonino
Comparison of the low-cycle and medium-cycle fatigue behaviour of ferritic, pearlitic, isothermed and austempered ductile irons
2013 Meneghetti, Giovanni; Ricotta, Mauro; S., Masaggia; Atzori, Bruno
Comportamento a fatica di giunzioni incollate in materiale composito
2010 Quaresimin, M; Ricotta, Mauro
Comportamento strutturale di giunzioni in materiale composito - Structural behavior of stepped-lap co-cured joints in composites
2003 Quaresimin, Marino; Ricotta, Mauro
Correlation among energy based fatigue curves and fatigue design approaches
2018 Atzori, B.; Ricotta, M.; Meneghetti, G.
Crack propagation analysis in composite bonded joints under mixed-mode (I+II) static and fatigue loading: a damage-based model
2013 Carraro, PAOLO ANDREA; Meneghetti, Giovanni; Quaresimin, Marino; Ricotta, Mauro
Crack propagation analysis in composite bonded joints under mixed-mode (I+II) static and fatigue loading: experimental investigation and phenomenological modelling
2013 Carraro, PAOLO ANDREA; Meneghetti, Giovanni; Quaresimin, Marino; Ricotta, Mauro
Crack tip position evaluation and Paris’ law assessment of a propagating crack by means of temperature-based approaches
2022 De Finis, R.; Palumbo, D.; Di Carolo, F.; Ricotta, M.; Meneghetti, G.; Galietti, U.
Critical distances approach reformulated for a better comparison of fatigue strength of materials with sharp notches
2020 Atzori, Bruno; Campagnolo, Alberto; Ricotta, Mauro; Meneghetti, Giovanni