Insights into the Weathering Crust Reservoirs of Granitoids: A Case Study from Qinghai Oilfield of Qaidam Basin, Northwest China

With proven reserves of 9.836 x 10(10) m(3), the largest known natural gas reservoir among terrigenous basement rocks has been discovered within the granitoids of the northern Qaidam Basin. Due to their high heterogeneity, the genesis of basement reservoirs remains unknown. Herein, the structure of the weathering crust in granitoids and their potential controlling factors on the reservoir development mechanism are discussed using a multidisciplinary approach based on data from cores, thin sections, scanning electron microscopy (SEM), conventional and imaging logs, and physical property and major elements analyses. Moreover, the classification standard of the weathering crust structure is established. The dissolution belt holding diverse reservoir spaces accounts for more than 50% of the total porosity, while the disintegration belt is the main context for the development of cleavage fractures and crack fractures. The original pores exist mainly among the crystal grains of quartz and mica, while the secondary pores and fractures were generated by the alteration of aluminosilicate minerals as well as biotite or hornblende. The quality of these reservoirs is controlled by their mineral composition, tectonic uplift, faulting, and paleogeomorphology. The femic granitoid is the main reservoir-forming lithology in the case of dissolution, while the felsic granitoid is more likely to develop cracks. The formation of the disintegration belt is significantly linked to the presence of faulting. These belts were mostly induced by tectonic deformation along the Altyn fault belt from the late Oligocene to the early Miocene. The diversity in paleogeomorphology influences the extent of the weathering. The exhumation in the Altyn terrane from the late Jurassic to the Cenozoic corresponds to the weathering and hypergene leaching period of the weathering crust within granitoids. Three types of reservoirs are present in the rocks: fractured-porous (Type I); porous (Type II); and fractured (Type III). The fractured-porous and fractured reservoirs were developed mainly in the granitic gneiss and granite, while the porous reservoir was formed in granitic diorite and granitic gneiss. The reservoirs that developed in the weathering crust of granitoids are dominated by Type I and Type II. The highest quality reservoir, which is the fractured-porous type, developed mainly in the dissolution belt of the weathering crust, and has a porosity ranging from 1.56% to 8.48% and a permeability ranging from 0.03 mD to 14.48 mD. The mechanisms of the development of weathering crust reservoirs provide further information for the hydrocarbon exploration of basement rocks worldwide.